B GRIP

NON-SLIP TREATMENT

B Grip is a completely biodegradable, water-based solution to make hard surfaces such as ceramics, porcelain stoneware, granite and concrete non-slip in wet as well as dry conditions.

The product is applied on the surface by hand or with a machine to increase the coefficient of friction (non-slip effect).It is effective on most outdoor and indoor surfaces where there is pedestrian traffic.

B Grip increases the coefficient of friction without altering the original texture or appearance of surfaces and without damaging the substrate or altering the cementitious material or fixing agents.

  • Non-slip treatment for a safe floor
  • It helps reduce accidents in dry or wet environments
  • Water-based colloid solution
  • The treatment becomes an integral part of the surface substrate and does not alter the appearance of the floor
  • It creates a non-slip effect
  • The non-slip effect is guaranteed for up to five years, depending on how the treated surface is maintained
  • It is a sanitary product
  • It is anti-bacterial, odourless and non-toxic
  • Effectiveness proven by the satisfaction of high-profile customers and certified by Europe’s leading certification institutes
  • The resulting coefficient of friction is a guarantee against all lawsuits due to accidental falls
grip_logo

USE ON

  • Ceramica
  • Porcelain
  • Marble
  • Granite
  • Stone

DO NOT USE ON

  • Plastic
  • Fiberglass
  • Polymers in general

APPLICATION:

BSYSTEMS SERVICE
PROFESSIONAL TREATMENT

TECHNICAL SPECIFICATIONS

APPEARANCE: opaque liquid
FRAGRANCE: not intense
SPECIFIC WEIGHT:
BOILING POINT: 100° C
PACKAGING: 5 liter containers
PH: ~ 3.0 – when diluted pH 5.0 ~
VOLATILE ORGANIC COMPOUNDS: 
BIODEGRADABILITY: 100%
MAXIMUM DILUTION: do not dilute the product
WATER SOLUBILITY: 100%
CONTAINS(reg.684/2004): 
HEALTH AND SAFETY WARNING: if necessary, wear personal protection devices

N.B.

The above information is based on the product data in our possession at the moment of publication and is provided in good faith.

No guarantee is provided as regards the quality or specifications of the product. The user is personally responsible for verifying that the product is suitable for the purpose.

HOW TO USE – FOR SPECIALIZED TECHNICIANS

WARNING: It is recommended to test the product on an inconspicuous part of the surface before starting treatment.

For optimal results Titania Dust must be applied on dry surface.

Patch test to determine the required contact time of the solution on the surface.

applicazione-magicclean

Apply over the surface evenly.

macchina-mono

Brush for a few minutes using a single-brush floor cleaning machine with a red/blue disk or Micro Clean disk.

orologio5_10min

Leave to work for 1-10 minutes.
Do not allow the product to dry.

macchina-aspiraliquidi

Remove excess solution using a wet vacuum cleaner.

risciacquo

Rinse the floor with cold water using a pressure jet set to 6/7 atmospheres.

macchina-aspiraliquidi

Remove excess solution using a wet vacuum cleaner.

Repeat until the desired effect is archieved.

CPmagic_pad

Contact us for more informations or for free dimostration


    I declare that I have read the Privacy Policy pursuant to Article 13 of Legislative Decree n. 196/2003

    I agree to the processing of data in the terms provided by the Privacy Policy for the requested service

    I accept