B GLASS

Permanent nanotech treatment for walls, ceramics and glass

B Glass is a coating that allows a easy cleaning, and can be applied either by spraying or manually. The silane polymers form a silicon coating on the surface.

The beads of water on the treated surface and marks such as lime soap are unable to adhere to the surface.

  • Easy to apply
  • Does not alter the appearance
  • Becomes part of the surface itself
  • The surface becomes “Easy to Clean”
  • Reduces cleaning costs by 90%
  • Reduces the use of chemical products by 90%
  • Considerably reduces cleaning times
  • Permanent
  • Suitable for shower cubicles, tiled walls, curtain walls, glazing, changing room walls, swimming pools, mirrors, glass furniture
protection_logo

USE ON

  • Transparent glass
  • Enamelled tiles
  • Mono-layer porous tiles
  • Double-fired tiles

DO NOT USE ON

  • Plastic

APPLICATION:

BSYSTEMS SERVICE
PROFESSIONAL TREATMENT

TECHNICAL SPECIFICATIONS

DESCRIPTION: partially polymerised polymer in an alcohol solution
APPEARANCE: clear, colourless liquid
SOLVENT: 2-Propanol, ethanol
FLASH POINT (DIN/ISO 2592): about 16°C
THICKNESS (DIN 51757) A 20°C: about 0.79 g/cm3
VISCOSITY (DIN 53015) A 20°C: > 5 mPa·s

N.B.

The above information is based on the product data in our possession at the moment of publication and is provided in good faith.

No guarantee is provided as regards the quality or specifications of the product. The user is personally responsible for verifying that the product is suitable for the purpose.

HOW TO USE

WARNING: It is recommended to test the product on an inconspicuous part of the surface before starting treatment.

For optimal results B Glass must be applied on dry surface.

Clean the surface thoroughly. Remove all residues of oil, grease and detergent with isopropyl alcohol and a cloth.

Spray or apply by hand.

APPLYING BY HAND

spruzzare-vetro

Spray 10 to 15 ml/sqm of product onto the surface

applicare-glass

Distribute evenly the product with a cloth.

orologio_30min

The coating forms within 30 minutes and can be touched.

alcool

Excess material can now be removed using alcohol.

If the treated surface is damaged, the coating can be repaired by applying additional product following the procedure described above.

Wait at least six hours after application of Easy to Clean before allowing the surface to come into contact with water.

SPRAY APPLICATION

apply-ceramics1

The product can be sprayed onto the surface with pressurised air.

Choose the most appropriate nozzle and pressure to produce an atomised mist that does not create drops on the surface.

orologio_30min

The coating forms within 30 minutes and can be touched.

If the treated surface is damaged, the coating can be repaired by applying additional product following the procedure described above.

Contact us for more informations or for free dimostration


    I declare that I have read the Privacy Policy pursuant to Article 13 of Legislative Decree n. 196/2003

    I agree to the processing of data in the terms provided by the Privacy Policy for the requested service

    I accept