Scroll Top

CLEANING PROCEDURES

AFTER LAYING CLEANING

  1. Vacuum the surface thoroughly to eliminate all dust.
  2. Dilute the B Clean / B Concrete to 15%-40% in a container (the dilution varies according to the dirt present).
  3. Spread the solution on the surface to be treated. The floor must remain wet.
  4. Exert mechanical action with the blue plate and green Magic Clean pad.
  5. Leave the solution to work for at least 10-15 minutes.
  6. Rinse the surface with water to detach the dirt.
  7. Take the blue plate and a dry Magic Clean ultra-microfibre cloth and dry the surface.

If there are residues of plaster on the surface, repeat over the whole floor or just the areas concerned.

If there are traces of silicone, paint, enamel, etc., use a solvent (diluent, turpentine, etc.).

After laying, all lapped floors not resistant to acids must be cleaned with B Decon detergent..

Stoneware floor refurbishing

  1. Vacuum the surface thoroughly to eliminate all dust.
  2. Spread pure B Clean. The floor must remain wet.
  3. Exert mechanical action with the blue plate and green Magic Clean pad.
  4. Leave to work for about 10 minutes.
  5. Rinse the surface with water.
  6. Collect the solution using the blue plate and a Magic Clean ultra-microfibre cloth.
  7. Take the blue plate and a dry Magic Clean ultra-microfibre cloth and dry the surface.

If there are traces of dirt left, repeat the operation across the whole surface or just the remaining marks.

If the floor is clean, but there is just a dark mark:

  1. Pour a few drops of B Clean onto the stain.
  2. Leave to work for about 10 minutes.
  3. Exert mechanical action with the blue plate and green Magic Clean pad.
  4. Pour water on the treated area.
  5. Take the blue plate and a dry Magic Clean ultra-microfibre cloth and dry the surface.

Indoor floors care procedure

  1. Vacuum the surface thoroughly to eliminate all dust.
  2. Dilute the B Main+ or B Decon detergent to 1%/3% (3 litres of water and 3cl of detergent).
  3. Dip the ultra-microfibre cloth in the Magic Clean solution, wet thoroughly and then wring.
  4. Lay the well wrung ultra-microfibre cloth on the floor.
  5. Attach the cloth to the frame.
  6. Wash the floor moving the frame in an ?S? movement.

Use this procedure whenever the floor needs washing.

The ultra-microfibre cloth can also be used dry as a duster.

Outdoor floors care procedure

or B Grip treated floors

  1. Dilute the B Main in a container to a 10% solution.
  2. Spread the solution on the surface to be cleaned. The floor must remain wet.
  3. Exert mechanical action with the blue plate and green Magic Clean pad.
  4. Leave the solution to work for at least 10 minutes.
  5. Rinse the surface with water to detach the dirt.
  6. Take the blue plate and a dry Magic Clean ultra-microfibre cloth and dry the surface.

The frequency of this operation varies depending on how quickly the dirt forms and therefore on the type of environment, the amount of tread and the processes taking place on the floor.

The treatment preserves the nonslip effect and ensures maximum hygiene.

MATERIAL IN-DEPTH CLEANING MAINTENANCE PROTECTION NON-SLIP NON-SLIP MAINTENCE
COTTO B Concrete | B Clean B Decon B Idrofobic | B Idrofobic W | B Seal servizio B Grip servizio | B MrGrip
GLAZED STONEWARE, POLISH, FULL BODY B Clean B Idrofobic | B Idrofobic W | B Seal servizio B Grip servizio | B MrGrip B Main
METALIS SANDSTONE, LAPPED B Decon B Decon B Idrofobic | B Idrofobic W | B Seal servizio
POLISHED STONE B Decon B Decon B Idrofobic | B Idrofobic W | B Seal servizio
UNPOLISHED STONE B Main+ | B Clean B Idrofobic | B Idrofobic W | B Seal servizio B Grip servizio B Main+
RESIN B Decon B Decon B Idrofobic | B Idrofobic W | B Seal servizio B Main+
RECONSTITUTED STONE, CEMENT B Decon B Decon B Idrofobic | B Idrofobic W | B Seal servizio
SHOWER TRAY B Clean B Main+ B Grip servizio | B MrGrip B Main
WOOD B Clean wood B Clean wood B Seal wood B Wax wood (with dry surface)
LAMINATE B Clean wood B Clean wood B Seal wood

IMPORTANT: latest generation stoneware does not require heavy use of chemical products.
BSystems Italia recommends alternating cleaning with the products and cleaning with pure water.
Clean using a cleaning product 2/3 times a week.

TYPE OF MARK PRODUCT
Grout installation residual B Concrete |B Clean
Oil and grease B Decon
Beer B Decon
Coffee B Decon
Wine B Decon | B Clean
Coca Cola B Decon | B Clean
Paint B Decon | B Clean
Rust B Clean
Concrete – Salpetre B Clean
Limescale B Clean | B Main+
Tar B Clean | B Main+
Candle wax B Decon
Chewing gum B Decon
Glue B Decon
Tyre marks B Decon | B Main+
Nicotine B Decon
Dirty joint B Clean | B Main+
Metal marks B Clean | B Main+
Tape Residues B Decon